Home/News/Choosing a 3D Fence: Opening Size, Wire Diameter and Application
Oct . 22, 2026 17:57 Back to list

Choosing a 3D Fence: Opening Size, Wire Diameter and Application



Anping Honglin Wire Mesh Co., LtdJOURNAL / THE BUYER'S GUIDE / SELECTION

THE BUYER'S GUIDE / SELECTION

Choosing a 3D Fence: Opening Size, Wire Diameter and Application

A buyer-focused guide to selecting a 3D fence from Anping Honglin Wire Mesh Co., Ltd, based on the published product specification: wire diameters of 4.0, 4.5 and 5.0 mm, mesh openings of 50×200 mm and 55×200 mm, panel heights from 1.03 m to 2.43 m with matching fold counts, 2.5 m or custom panel length, and galvanized, powder-coated or PVC-coated finishes. It explains how to match these options to site type and what to confirm before requesting a quotation.

Choosing a 3D Fence: Opening Size, Wire Diameter and Application
AI-generated illustration; not a real product photograph, specification, operating permission or test certificate.
01

Mesh opening: 50×200 mm (common) or 55×200 mm, as listed in the published specification

02

Wire diameter: 4.0 mm, 4.5 mm or 5.0 mm

03

Panel height and fold count: 1.03 m, 1.23 m or 1.53 m (2 folds); 1.73 m (3 folds); 1.83 m (3/4 folds); 2.03 m or 2.43 m (4 folds)

04

Panel length: 2.5 m standard or custom

05

Finish: galvanized, powder-coated in a range of colours, or PVC-coated

06

Posts and fixing: matching 3D-profiled posts, with panels attached by clamps

07

Site and application: flat or sloped ground and general or sandy land; commercial and residential uses such as schools, factories, warehouses, stadiums, gardens, construction sites, airports and railway stations

Choosing a 3D Fence: Opening Size, Wire Diameter and Application

A 3D fence is a welded wire mesh panel with V-shaped bends (folds) formed across the panel. According to the product description published by Anping Honglin Wire Mesh Co., Ltd, these bends add strength and visual interest. The panels are made from low carbon galvanized steel wire and fixed to metal posts with clamps.

This guide covers the specification choices buyers, distributors and procurement teams need to make: opening (mesh) size, wire diameter, panel height and fold count, panel length, finish and application. It uses only the published product specification. Prices, lead times and project-specific suitability are not covered here and should be confirmed directly with the supplier.

1. Start with the site and its requirements

Before comparing specifications, write down:

  • Site type: for example a construction site, residential building, school, factory, warehouse, sports field or stadium, garden, highway or airport service area, or railway station. The product description lists all of these as typical uses.
  • Ground conditions: the published material says 3D fence panels can be installed on flat ground or slopes, and on different land types such as general land surface or sand.
  • Required height and total run length, which set the number of panels and posts.
  • Finish and colour: whether galvanized only or a coated finish is needed.

These answers narrow the specification quickly.

2. Opening (mesh) size

The specification table lists two mesh openings:

Mesh sizeNotes from published material
50 × 200 mmDescribed as the common mesh size; intended to keep visibility while maintaining security
55 × 200 mmListed as an alternative opening

The published material does not compare climb resistance or security performance between the two openings. If your project has a specific opening requirement, for example from a site specification or tender document, state it in your inquiry and confirm it against the supplier's drawings.

3. Wire diameter

The listed wire diameters are 4.0 mm, 4.5 mm and 5.0 mm. The product description says wire diameter typically ranges from 4 mm to 5 mm, "providing a robust barrier against intrusion."

When choosing a diameter:

  • The three sizes are the options.
  • The source does not give load, impact or service-life figures for each diameter. If your project needs those, ask for test data instead of assuming a thicker wire meets a particular standard.
  • Confirm whether the stated diameter applies before or after coating, especially for powder-coated or PVC-coated panels. The published material does not say.

4. Panel height and number of folds

In the specification table, panel height is linked to the number of V-shaped folds:

Panel heightFolds
1.03 m2
1.23 m2
1.53 m2
1.73 m3
1.83 m3/4
2.03 m4
2.43 m4

The descriptive text also gives a height range of about 1.2 m to 2.4 m, "catering to different security needs." Because the table includes a 1.03 m panel, confirm the exact height and fold count you need when you request an offer. For the 1.83 m panel, where 3 or 4 folds are listed, specify which one you want.

5. Panel length and posts

  • Panel length: 2.5 m as standard, or custom.
  • Posts: matching posts with 3D profiling are available. The product description says they are designed for easy installation and long-term stability. Panels are attached to the posts with clamps.

The published material does not give post dimensions, foundation details or clamp specifications. Ask for these separately if your installer needs them.

6. Material and finish

The panels are made from high-grade, low carbon galvanized steel wire. The listed finishing options are:

  • Galvanized, for corrosion resistance
  • Powder-coated, available in a range of colours
  • PVC-coated, described as giving extra durability and a choice of appearance

The source does not give coating thickness, zinc weight or salt-spray results. If your project specification requires these values, request them before ordering.

7. Matching the 3D fence to the application

The published material describes the 3D fence as suitable for both commercial and residential properties. Listed uses include airports, schools, factories, residential areas, gardens, warehouses, stadiums, entertainment venues, construction sites, sports fields, highway or airport service areas and railway stations.

When this guide may not apply: The product is a welded wire mesh 3D fence panel.

8. What to include in your inquiry

The supplier's FAQ says an inquiry should include material, length, width, wire diameter, mesh size and quantity, plus any special requirements. A complete 3D fence inquiry might list:

  1. Panel height (and fold count where more than one is listed)
  2. Panel length (2.5 m standard or custom)
  3. Wire diameter (4.0, 4.5 or 5.0 mm)
  4. Mesh size (50 × 200 mm or 55 × 200 mm)
  5. Finish (galvanized, powder-coated or PVC-coated) and colour
  6. Number of panels and matching posts
  7. Site conditions such as slopes or sandy ground

The supplier's FAQ says lead time varies by season and order quantity, so confirm timing with your quotation. No price or delivery commitment is made here.

THE COMPANY

Anping Honglin Wire Mesh Co., Ltd

As Anping Honglin Wire Mesh Co., Ltd continues to grow and evolve, we invite you to join us in this journey of excellence. Discover the difference that comes with partnering with a leader in the metal wire mesh industry.

About Us ↗Visit company website ↗

YOUR NEXT STEP

Bring your brief. Start a useful conversation.

Use case, specification, quantity and delivery window: make the next conversation specific.

Share

tel
Email

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.