Wire Mesh Price: How to Choose Crimped Mesh by Opening and Wire Diameter

Start with the opening your process needs

A 20 × 20 mm mesh size is the listed configuration for this product. That measurement gives you a clear starting point for checking whether the mesh can screen, separate or support the material in your process. For a quarry or industrial screening project, compare the opening with the size of the material you need to retain or pass through. For a decorative panel, check the visual openness as well as the panel dimensions.

The opening is tied to the wire diameter and weaving pattern. Crimped Wire Mesh uses wires that are bent at regular intervals, then woven after crimping. This construction creates uniform openings and dimensional stability for applications where the mesh must keep its shape during handling or use.

Match wire diameter to the working condition

Our Crimped Wire Mesh is supplied with wire diameters from 3 to 20 mm. The right point within that range depends on the work the mesh must perform. A screening buyer should provide the material being screened and the operating situation so we can match the requested diameter to the application. A decorative buyer should give the required appearance and panel size along with the diameter.

Wire diameter is also one of the first details to fix when comparing wire mesh price. Two meshes can have the same general product name and the same opening while using different wire diameters. Those are different specifications and should be quoted separately. Put the opening and wire diameter together in your inquiry instead of asking for a general mesh price.

Select the material for the environment

We supply Crimped Wire Mesh in stainless steel, high-carbon steel and galvanized steel. Choose the material according to the environment and the job. Stainless steel suits buyers who specify stainless steel for the mesh material. High-carbon steel suits applications that call for this steel type in a crimped woven mesh. Galvanized steel suits buyers who require galvanized steel for their mesh order.

The product is commonly used as a quarry screen in mines, quarries and other industrial fields for sieving, grading and separating materials. It is also used for filtration, separation and decorative purposes. Send the material choice with the application, because a quote for stainless steel is not the same purchasing request as a quote for galvanized or high-carbon steel.

Check width and length before requesting a quote

The product comes in widths from 0.5 to 2.5 m and lengths from 5 to 30.5 m. These dimensions affect how the mesh will be handled, installed or integrated into your equipment. Measure the screen frame, chute, filter support or decorative opening before you request a price.

Picture a quarry screen arriving as a roll that must fit the planned screening equipment. Confirm the required width against the frame and confirm the length against the replacement or installation plan. For a decorative project, measure the panel area and decide how many pieces are needed before asking for a quote. These checks prevent a general wire mesh price from being compared with a differently sized order.

Crimped Wire Mesh is packed with PE rainproof cloth outside each roll and then packed in a plywood pallet, or by another suitable packing arrangement. Include the packing requirement if your receiving or storage process needs a particular arrangement.

Choose the product for the job it must do

Crimped Wire Mesh fits buyers who need a woven crimped mesh for screening, filtration, separation or decorative use. Its listed 3 to 20 mm wire diameter range and 20 × 20 mm mesh size give procurement teams a defined starting specification. We can customize the product when you provide instructions or drawings.

For mine and quarry screening, focus your request on the material being separated, the 20 × 20 mm opening, the required wire diameter, the steel type and the roll dimensions. For filtration or separation, include the process description and the size of the supporting frame. For decorative work, include the finished panel dimensions, material and visual opening required.

Our factory can produce stock products and customized orders. Stock products are usually delivered within 10 days, while customized orders may take longer. We inspect pre-production samples before mass production and carry out a final inspection before shipment. If you are comparing wire mesh manufacturers or suppliers, put the same technical details in every inquiry so the prices refer to the same product.

Questions to settle before ordering

Send a complete specification for a comparable price

Crimped Wire Mesh is the suitable choice for a woven mesh requirement involving screening, filtration, separation or decorative work. To obtain a comparable wire mesh price, send the application, mesh opening, wire diameter, material, width, length, quantity and packing requirement. Add a drawing when the mesh must fit equipment or a fixed frame.